In this article, we will discuss the dirt bike suspension calculator. If you’re looking to get the most out of your dirt bike, you need to make sure you have the right suspension. But how do you know what kind of suspension you need? That’s where our dirt bike suspension calculator comes in. You should also know how dirt bike suspension works.
Just enter some basic information about your bike and riding style, and our calculator will give you recommendations on what kind of suspension you need. Whether you’re looking for a softer ride for the trails or a harder setup for the motocross track, our calculator will help you find the perfect suspension for your needs.
Table of Contents
Calculating dirt bike sag
Dirt bike sag is the amount that the rear of your bike squats under your weight when you are seated in the riding position. Sag is important because it affects the handling of your bike and how the suspension works. If your sag is too low, your bike will feel unstable and may bottom out on the bumps. If your sag is too high, your bike will feel harsh and will not absorb the small bumps as well.
There are a few different ways to calculate sag. The most common method is to use a Percentage of Total Travel (PTT) measurement. This is done by measuring the distance from the ground to the highest point on the rear of the bike (at the center of the rear axle) with the rider in the riding position. This measurement is then divided by the total amount of travel of the rear suspension.
However, if you want a more finite breakdown, click the link (setyoursag.com) to be sent directly to the website where you can calculate your dirt bike sag! This way you can get the best idea of the sag. You should also visit our article on do dirt bikes have gears.
Calculating spring rate
As you know, the spring rate of a dirt bike suspension is critical to both the bike’s handling and the rider’s comfort. Spring rate is the measure of how stiff a spring is, and it is typically expressed in pounds per inch (lbs/in). The higher the spring rate, the stiffer the spring, and the less travel it will have. You should know about dirt bike suspension troubleshooting.
Choosing the right spring rate for your bike and your riding style is important, as too high or too low of a spring rate can lead to problems. If the spring rate is too high, the bike will be difficult to control and the rider will be uncomfortable. If the spring rate is too low, the bike will bottom out easily and the rider will again be uncomfortable.
The good news is that there are a few easy ways to calculate the spring rate that you need. To calculate the spring rate, you will need to know the amount of force required to compress the spring by a certain amount. This can be measured using a force gauge.
Once you have the force required to compress the spring by a certain amount, you can calculate the spring rate by putting some basic information about rider weight, wheel travel, and shock strokes in the basic spring calculator.
Final thoughts on dirt bike suspension calculator
In conclusion, the dirt bike suspension calculator is a necessary tool for setting up your dirt bike suspension. The calculator is easy to use and provides accurate results. However, it is important to remember that the calculator is only a tool and should not be relied on for critical calculations.
It is important to know your bike’s spring rate and to calculate your sag. By doing this, you will be able to set up your bike for the conditions you will be riding in.
I hope you enjoyed this article. This article has taken a look at a dirt bike suspension calculator. If you have any questions about the dirt bike suspension calculator, please leave a comment below.